ACME Smart Multicolor LED Bulb

Of course – you should use “Smart Life” for Android version 4.1 and above, as well as iOS version 9.0 and above

It’s very easy, you should simply follow these steps: first of all, turn off the light switch and screw in the bulb into a socket. Once installed turn on the light switch. The bulb will start blinking rapidly (EZ mode) or slowly (AP mode), with the EZ mode connection being set as default in Wi-Fi configuration. Secondly, you can turn the light bulb on and off 3 times to enable the device to switch between EZ mode and AP modes.  Once that is done, simply follow the instructions in the app, or refer to the manual provided in the package for a more detailed pairing process explanation

Of course – in EZ (easy mode) mode the LED Bulb directly connects to your home router, while in AP (access point) mode the LED Bulb creates an access point which connects to the smartphone and to your home router.
* Each mode is suitable for different router types. Try one, and if it doesn’t work, try the other one

Sure –simply use the Remove Device button in the device settings menu

It’s very easy – simply open the application device menu and go to Settings, then click Restore Manufacturer Defaults

Unfortunately, the LED Bulb cannot be controlled via the application if the actual light switch is off. Please make sure that the light switch is on if you want to control your device using your smartphone. You can leave the light switch on and turn off the LED Bulb via the application

Yes indeed, however the LED Bulb can be dimmed via the “Smart Life” application only

It might have been put into a pairing mode by turning the light switch on and off quickly multiple times. Please turn off the light switch for couple of minutes to return to operational mode and turn it back on

Great news – there’s no limit as to how many LED Bulbs you can add and use in the app

Of course, it is! You can set the schedule to turn the device on or off at specific times

Of course, it is! If you have more than one ACME Smart LED Bulb you can group them together and control them all at the same time

Great news – the LED Bulb can be controlled from any location using the free “Smart Life” app for smartphones and tablets, as long as your mobile device is connected to the Internet or your local wireless network

Don’t worry, the issue is simply to do with different routers. Make sure that the router you are trying to connect to has a port forwarding enabled to access the device. If that’s a bit too complicated for you to do, maybe get in touch with your network provider. They should be able to guide you step-by-step

Of course, you can – simply control it using the light switch button. However, the initial setup and pairing procedure still requires a smartphone to set up

The short and sweet answer is – no, there is no difference

It’s very easy – simply turn the LED Bulb on and off 3 times to go into a pairing mode. After successfully resetting LED Bulb, just follow the Wi-Fi setup procedure in the “Smart Life” app

We advise you to refer to the manual included in the package for a detailed explanation of the setup process

You can ask to turn on/off the lights, dim or brighten the lights or change its color. For a more detailed explanation please refer to the user’s manual included in the package

Great news – yes, it is possible and yes you should set a custom name of each LED Bulb, while setting them up in the “Smart Life” application

Of course, it is! The way it works is as follows: the user account, which initially sets up the LED Bulb and connects it to the Wi-Fi network is the owner and the primary account. In order for other users to gain control over the LED Bulb, the ‘owner account’ must ‘share’ the device with them, which can be done in the “Smart Life” app settings. This way, another user gains control over the LED Bulb without going through the whole set-up process

Unfortunately, the LED Bulb only supports the 2.4GHz Wi-Fi network

Don’t panic, simply follow these steps: first of all, make sure that your device is connected to a 2.4 GHz Wi-Fi network, since 5 GHz Wi-Fi network is not supported. Secondly, make sure that your Wi-Fi network has a strong signal. Finally, make sure that your wireless router/access point or the network provider is not blocking the P2P (peer to peer) networking. If the light switch is turned off, the power coming into the LED Bulb is cut off and therefore the Bulb cannot be controlled via the app. If you want to control the device using the application, the light switch must be turned on

Absolutely not, it might have happened simply due to your Wi-Fi network being turned off. Please turn on the light switch, check and restart the router

That’s very simple – you can check the status of the LED Bulb using the “Smart Life” application

All you need is a 2.4 GHz wireless network and a mobile device connected to the internet, that’s all!

Unfortunately, the answer is no, since the LED Bulb was designed for indoor use only

Fortunately, you don’t need to, since the LED Bulb remembers the IP configuration and will continue working without setting it up again (as long as you stay on the same Wi-Fi network)

GDPR is intended to protect the fundamental privacy right of EU data subjects and the security of personal data, and we can fully confirm that our platform is ready for GDPR compliance assessment